Get The Answers You Are Looking For
Get the answers to your security questions fast. Look through the Alarm System FAQ questions and answers or fill out the form below to receive answers to all your security questions.


How do you test your alarm system locally?

If you would like to verify that your Power, battery and siren are fully functioning, you can perform a local system test in the user menu section of your alarm system.

Press [*][6] followed by your 4 digit [master code] and press [4]

The panel will perform the following; activate the Siren, keypad buzzer and all keypad status lights for 2 seconds, test the backup battery and transmit a reporting code to the central station.

How do you program the time and date on a DSC system?

To Program Time and Date you will have to enter the user menu section of your alarm system.

Press [*] [6] and your [master code]. Now press [1] and enter the time and date using the following format [HH:MM] [MM/DD/YY].

Program the time using military standard, e.g., 8:00 pm = 20:00 hours. Press [#] twice to exit.

Get Answers to Your Security Questions

Your Name (required)

Your Email (required)


Your Message

© 2019 Syncronos Security Systems | All Rights Reserved